• Low smoke
• Dyed so that your fuel changes colour when you mix it
• Reduces exhaust port blockages
• Low deposits to keep piston rings free
• Mixes readily with petrol

Simply add Nulon 2 Stroke Scooter & MX Engine Oil to your fuel tank at the recommended treatment rate (shown below).

TREATMENT RATE:

HOW TO USE MEASURING CHAMBER:

Loosen cap on measuring chamber just enough to allow air release (around half a turn). Squeeze bottom of bottle to push fluid into the measuring chamber, releasing bottle once fluid reaches desired dosage. Remove cap from measuring chamber and pour fluid into fuel container, ensuring it is thoroughly mixed with petrol before adding mixed fuel to fuel tank. If fitted with an oil injection system, add the required quantity of oil to the oil tank. Replace cap and tighten for storage.

NOTE: Refer to your motorcycle or equipment service manual for correct lubrication requirements and service intervals.

SAFETY: Avoid contact with skin and eyes. If contact occurs, wash area thoroughly with soap and water.
For advice, contact a Poisons Information Centre (e.g. phone Australia 13 11 26; New Zealand 0800 764 766) or a doctor (at once).

ENVIRONMENT: Do not pollute drains, soil or water with used products. After use, dispose of container in a responsible manner. Do not dispose of to landfill. Disposal of container should comply with local council regulations.