• Anti-freeze/anti-boil protection for 3 years or 100,000 km
• Contains long life inhibitor technology for corrosion protection of cooling system metals
• Ready to use – just pour directly into the cooling system
• Suitable for a wide range of vehicles in Australia and New Zealand
• Protects aluminium, steel, cast iron, solder, copper and brass
• Safe for all hoses, gaskets and seals
• Safe to mix with existing green coolant

DIRECTIONS AS COMPLETE FILL: Refer to the owner’s manual for cooling system capacity. 

1. If the system is clean, ensure the engine is switched off, turn the heater on and drain the old coolant (when cool) by removing the drain plug or bottom radiator hose. 
2. Then flush the cooling system with clean water to remove all traces of old coolant. 
3. Add Nulon Coolant Premix. Secure the radiator cap start the engine, bleed air from the system if necessary. 
4. Check the coolant level is correct when the system is cool. 

AS TOP-UP TO EXISTING COOLANT: 

Add as top-up to existing green coolant,then start the engine and turn the heater on. When the engine is warm, turn it off and allow it to cool. Check the coolant level, and top it up if necessary. 

NOTE: The life of Nulon Coolant Premix when used as a top-up, defaults to that of the original coolant in the cooling system. If you are unaware of the type or life of the coolant in the system we recommend a complete coolant change within the next 5000 km or 6 months.

SAFETY: Harmful if swallowed.

FIRST AID: IF SWALLOWED: Immediately call a POISON CENTRE or doctor/physician. Rinse mouth. IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing. For advice, contact a Poisons Information Centre (e.g. phone Australia 13 11 26; New Zealand 0800 764 766) or a doctor (at once).

ENVIRONMENT: Do not pollute drains, soil or water with used products. After use, dispose of container in a responsible manner. Disposal of container should comply with local council regulations.