• Prevents cavitation
• Maximum anti-freeze/anti-boil protection
• Provides excellent corrosion resistance
• Compatible with all hoses, gaskets and seals
• Long service life
• Environmentally friendly

DIRECTIONS FOR SERVICE REFILL: Refer to the owner’s manual for cooling system capacity. If the cooling system is dirty we recommended using Nulon Radiator Flush before using this product.

1. If the system is clean, ensure the engine is switched off and drain the old coolant (when cool) by removing the drain plug or bottom radiator hose
2. To completely flush the system, continue to add demineralised water until all remnants of the old coolant have been flushed from the system
3. Replace drain plug or bottom radiator hose
4. Add Nulon Motorcycle Coolant to the radiator
5. Check the coolant level is correct when system is cool and top up as required

SAFETY: Avoid contact with skin and eyes. If contact occurs, wash area thoroughly with soap and water.
For advice, contact a Poisons Information Centre (e.g. phone Australia 13 11 26; New Zealand 0800 764 766) or a doctor (at once).

ENVIRONMENT: Do not pollute drains, soil or water with used products. After use, dispose of container in a responsible manner. Disposal of container should comply with local council regulations.