Pro-Strength Air Filter Oil (AFO300)
Nulon Pro-Strength Air Filter Oil is a super tacky, dirt grabbing and water resistant formulation.
Upon application the treated filter traps dirt, sand, dust and other particles to prevent small contaminants entering the engine and causing premature engine wear.
Pack sizes
- Captures sand, dust and dirt particles
- Extends air filter life
- Repels water
- Maintains airflow for instant throttle response
Directions For Use:
Wear protective gloves when using this product.
- Shake can thoroughly before use.
- For best results, ensure the filter is clean, dry and free of dirt and dust prior to application.
- Apply an even layer of oil to the filter.
- Massage the filter thoroughly (wearing protective gloves) to ensure maximum oil penetration.
- Allow the filter to dry in a well-ventilated area for 10-15 minutes before restarting the engine. Once dry, a tacky oil film should remain on the filter.
- Reapply as required.
Caution: Keep away from heat/sparks/open flames/hot surfaces. Do not smoke when using product. Pressurised container:do not pierce or burn, even after use. Do not spray on an open flame or other ignition source. Avoid breathing spray. Wear protective gloves/eye protection. Use only outdoors or in a well-ventilated area.